canyonken
Seaman
- Joined
- Jun 23, 2008
- Messages
- 58
I want to install one of those 12 volt accessory adaptors on my dash so I can plug in various 12V things like little air pumps etc...
I know the black wire just ties into any other black ground wire under the dash. The confusing part is the power wire. Not sure where to tie in the red power wire.
Boat is 1996 searay 175XL with 4.3LX merc.
I am looking at quicksilver instrumentation diagram.
There is a red/purple wire going to top of ignition switch with an inline 20 amp fuse. Is this the wire I should be tieing into for power to outlet ??
If so, which side of 20 amp fusr should I splice into?
thanks
ken
I know the black wire just ties into any other black ground wire under the dash. The confusing part is the power wire. Not sure where to tie in the red power wire.
Boat is 1996 searay 175XL with 4.3LX merc.
I am looking at quicksilver instrumentation diagram.
There is a red/purple wire going to top of ignition switch with an inline 20 amp fuse. Is this the wire I should be tieing into for power to outlet ??
If so, which side of 20 amp fusr should I splice into?
thanks
ken