96SportJet
Cadet
- Joined
- Apr 27, 2008
- Messages
- 9
I recently posted a thread regarding my ignition. But after further troubleshooting I found my problem to be the oil injection system. I ran the boat today, as soon as i started it I ran it at about 2k rpm for about 2min and then it finally bogged down fast and cut off. Wouldn't start back up, it would hit and then immediatly cut off.
I looked in the carbs and saw oil just sitting in there. I ran my finger through it and it was mostly oil. I searched and saw alot of info about other engines but wanted to know If I can delete the oil injection off this engine and just pre-mix, or is this a simple fix.
BTW: it's a 1996 Sea Rayder F16 with the 120hp engine.
Thanks
-Dennis
I looked in the carbs and saw oil just sitting in there. I ran my finger through it and it was mostly oil. I searched and saw alot of info about other engines but wanted to know If I can delete the oil injection off this engine and just pre-mix, or is this a simple fix.
BTW: it's a 1996 Sea Rayder F16 with the 120hp engine.
Thanks
-Dennis