192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

[yakko]

I'm putting a V6 where my 3.7L was. I need some pics of a 192 Wellraft with a V6 or V8. If some one has one of these,
I could use some help.

Thanks in advance.

 

[achris]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

This will probably be more helpful.

http://www.mercurymarine.com/media/mercury/drawings/43l2pc.pdf

Chris.......

 

[Bondo]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

I'm putting a V6 where my 3.7L was. I need some pics of a 192 Wellraft with a V6 or V8. If some one has one of these,
I could use some help.

Thanks in advance.

Ayuh,.... Welcome Aboard,.... How 'bout you post pictures of Yer's, 'n We'll tell ya how, 'n where to build the motor bed,...

The Final postionin' is found by hangin' the motor on the rear mounts, 'n Alignin' it with the bar, then measure where it's at,...

 

[yakko]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

Ayuh,.... Welcome Aboard,.... How 'bout you post pictures of Yer's, 'n We'll tell ya how, 'n where to build the motor bed,...

The Final postionin' is found by hangin' the motor on the rear mounts, 'n Alignin' it with the bar, then measure where it's at,...

So no one has a V6 in their 192 Wellcraft? I know I can hang the new V6 on a hoist, with the rear bolts in, then use the out drive alignment tool. I just need an idea about weather to use 2 x 6's sandwiched or 4 x 4s. I'm leaning towards the
2 x 6s in fiber glass.

Thanks

 

[81 Checkmate]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

Id say either would work...all depends on the width/shape you want.

Post your question over in the resto forum and im sure you will get the right answer.

 

[Bondo]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

So no one has a V6 in their 192 Wellcraft? I know I can hang the new V6 on a hoist, with the rear bolts in, then use the out drive alignment tool. I just need an idea about weather to use 2 x 6's sandwiched or 4 x 4s. I'm leaning towards the
2 x 6s in fiber glass.

Thanks

Ayuh,.... To small a resource pool,....

That's why pictures help so much,...

 

[yakko]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

A picture tells a thousand stories!! LOL!!!

 

[achris]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

Well, since nobody has a picture for you, I guess you're going to miss out on your stories....

I pulled an in-line 6 out of my Bertram in 1994 in order to fit a V6. I didn't have any pictures. I just went from the installation drawings (like the ones I posted up for you) and worked with a measure, a pencil and a brain... It's not rocket science... Just get the tape measure out and start measuring up... :facepalm:

 

[yakko]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

That's way to much rocket science. I'm just lookin for a picture. Oh well. When I do the install, I'll post some pics so the other Wellcraft 192 folks have something to go by.

Thanks

 

[73Chrysler105]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

My neighbor has a wellcraft with a 4.3V6 need to see if I can get you a picture but it may not help all that much.

 

[yakko]

Re: 192 Wellcraft engine mounts for 4.3L V6 dose anyone have a picture?

That would be great! It will give me the ideas I need to install the new engine.

Thanks