1936 evinrude elto 1.5 hp

[jeffpike83]

#1.need help finding a water pump it runs but may need a new one.
#2.how should i mix the fuel.
#3.what is this thing worth.


if you can find me a pump the numbers on it are 4146-0526. thanks

 

[JB]

Re: 1936 evinrude elto 1.5 hp

Check with the guys at the antique outboard motor club www.aomci.org.

Good luck.

 

[wilde1j]

Re: 1936 evinrude elto 1.5 hp

Fully restored, cosmetically and functionally, you could get 500 to $600. Not restored 150 to $200. BTW, you can get an owner's manual and shop manual from outboardbooks.com if you planning to use/work on the motor. The old water pumps are often not similar to modern pumps (many use cast hard impellers or even metal ones (seldom need replacement)). Most of the very old motors should use 16:1 mix with TCW-3 oil.

There's a guy who makes impellers for antique motors, but I've lost the link. Someone or the list of links on the antique outboard site may have it.

 

[jeffpike83]

Re: 1936 evinrude elto 1.5 hp

yeah the water pump is a round brass part on the shaft. thanks guys ill chech them out.