1957 Evinrude Lark 35 HP

[jemerick]

I found a 1957 Evinrude Lark in the basement of our camp. Motor needs a little TLC but otherwise looks like it is in good shape. I was thinking of putting some time and money into it to restore it some but my question is it worth it. I really do not have any use for it as my new boat is an inboard. I trired to research the value of these motors thinking it is an antique but am having no luck. Does anyone out there know anything about this motor?

Thanks,

Jason

 

[tx1961whaler]

Re: 1957 Evinrude Lark 35 HP

If you are not going to use it, then it's not worth it to get running. It usually costs close to $150-$200 (ignition, carb kit, impeller, etc.) to get it to a reliable running state. The motor would not sell for more than $350, depending on where you're at.

 

[CATransplant]

Re: 1957 Evinrude Lark 35 HP

The old big twins are good outboards, and, if it has good compression and the lower unit is OK, they're easy to get running. Value? A running one in decent cosmetic shape around my area is worth about $300 if you can find a buyer.

Likely yours will need new coils. A complete replacement of the ignition system will run you about $100. It will also need a carb rebuild, most likely. Not expensive ($25-30), but it takes some time.

If you need a 35 hp outboard, it's definitely worthwhile. If you don't, then don't expect a big financial return.

 

[geedubcpa]

Re: 1957 Evinrude Lark 35 HP

I say go ahead and get it running - its at least a good learning experience to find out how to fix the motor.

 

[coolguy147]

Re: 1957 Evinrude Lark 35 HP

I say go ahead and get it running - its at least a good learning experience to find out how to fix the motor.

2 thumbs up on that.

if u do it cheaply u man get some finacial but not much

 

[Willyclay]

Re: 1957 Evinrude Lark 35 HP

Welcome to the iboats.com forum. The experts here, which I am not, can help you solve any problem. They are a great resource for anyone thinking about a project like yours. I have scanned and saved a non-factory service manual that covers your model motor. Send me a Private Message with your email address and I will send you a copy if you want it. Good luck!

 

[jemerick]

Re: 1957 Evinrude Lark 35 HP

Thanks for all of the feedback. I guess will try and get it running. I have been working on boats for about 10 years but mostly inboards so i'm not completly in the dark.

First question is "how do i remove the flywheel? Do i need a puller or can i do it without?"

 

[lindy46]

Re: 1957 Evinrude Lark 35 HP

Thanks for all of the feedback. I guess will try and get it running. I have been working on boats for about 10 years but mostly inboards so i'm not completly in the dark.

First question is "how do i remove the flywheel? Do i need a puller or can i do it without?"

Yes, you need a puller. See instructions:
http://forums.iboats.com/showthread.php?t=294072

 

[F_R]

Re: 1957 Evinrude Lark 35 HP

Yes, you need a puller. See instructions:
http://forums.iboats.com/showthread.php?t=294072

And I just got done explaining it all again at http://forums.iboats.com/showthread.php?t=331716