1965 Yachtwin 3 hp Evinrude

[REELFISHERMAN]

Can anyone tell me the proper procedure in synchronizing the magneto to the carbureter?

 

[Joe Reeves]

Re: 1965 Yachtwin 3 hp Evinrude

Reel.... There is a scribe mark on the cam that slides against the vertical arm linkage that opens the throttle butterfly. The throttle should just start to open when that scribe mark in dead center with the vertical arm.

 

[REELFISHERMAN]

Re: 1965 Yachtwin 3 hp Evinrude

Thanks for the information.<br /><br /> The Reelfisherman

 

[REELFISHERMAN]

Re: 1965 Yachtwin 3 hp Evinrude

Joe, I checked the cam on this motor and there is no scribed mark. I rebuilt another 3 hp several months ago and it had the scribe mark. Do you have any idea of the measurement from the small end of the cam to the scrib mark? Thanks THE REELFISHERMAN

 

[Bear]

Re: 1965 Yachtwin 3 hp Evinrude

I don't know if you seen this. I don't know if you need it at all but here it is anyway:<br /> tune up on a small motor, in this case a 1962 Evinrude 3HP <br />