1967 Johnson 100 hp Meteor outboard

rosebuddusty

Cadet
Joined
Sep 10, 2015
Messages
7
I noticed that the backing on my power pack had melted off. There is a pool of gray sticky material below the power pack. I don't know why it melted. I assume this material was for insulation purposes.
The engine still starts and runs. Will this cause an issue with running the boat?
Thanks for your help.
 

Attachments

  • IMG_2976.jpeg
    IMG_2976.jpeg
    1.9 MB · Views: 8

McGR

Senior Chief Petty Officer
Joined
Jun 19, 2004
Messages
667
Maybe, then again, maybe not... Some of those old potting compounds just tend to ooze a bit. Potting compounds are generally used for protection against the operating environment - insulation, moisture, shock, vibration etc. .
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
13,853
Interesting Crinkle Paint. Either the result of Heat, or someone Repainted it.

CDI/Serria makes a replacement for it
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,802
The 1966 ( and other years ) model distributor , points , condenser and 12 volt coil can be fitted to the 67 model.-----Save you some money.
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
13,853
Racer is referring to the Battery Ignition system of the some of the V4s from 1961 thru 1967
 
Top