1968 johnson 3hp

[reb1277]

what is the initial setting for low speed and high speed jets on this little jewel? <br />Thanks

 

[OBJ]

Re: 1968 johnson 3hp

Yo Reb....take about 3/4 turn on the high speed needle and a full turn on the low speed. Should get ya' goin'. Set the high speed first. Then come down and set the low speed. Start the adjustments by going in. About 1/8 turn till you get close and then less as you get to the sweet spot.<br /><br />Edit: Don't get them too lean. Once you find the perfect setting, back out a little. This will prevent to lean running.

 

[reb1277]

Re: 1968 johnson 3hp

thanks OBJ I'll give that a try tomorrow--don't have manual--friends little motor<br />reb