1970 Lucraft Trihull Restoration

[mccrame29]

Posting a little late, but i have benefited so much from others on his forum maybe mine will help.

Like someone siad in another post I read...if you have floor rot the stringers are probably shot too. I finally got it out his afternoon by using a grinder and cutting at the base then a little prying.

 

[evildocrsx]

Re: 1970 Lucraft Trihull Restoration

What engine do you have?

 

[mccrame29]

Re: 1970 Lucraft Trihull Restoration

It is a 1971 40 hp Evinrude Ski Twin. I have also done some reworking of it; new seals and bearings in the foot, rebuilt carb, and installed new coils/points plug wires.

 

[mccrame29]

Re: 1970 Lucraft Trihull Restoration

the boat really isnt worth restoring but it belonged to my wifes grandfather. I hope it will last another 40 yrs so my sons could enjoy it.

 

[mccrame29]

Re: 1970 Lucraft Trihull Restoration

Some more pics...showing worn points, what the magneto looked like before replacement, after the stringer was removed, and the foot entrails.

 

[mccrame29]

Re: 1970 Lucraft Trihull Restoration

Progress is very slow right now because I am taking a chance on balance and center of gravity by making modifications to the floor. Like adding storage compartments and a deck to the front. I will also add a bit of coverage to the portable gas tank and batteries at the transom.

I will post some pics later.

 

[tallcanadian]

Re: 1970 Lucraft Trihull Restoration

Boats are always worth restoring. And your grandfather would be proud when you get it done. Nice boat, by the way.