1973 14ft Aluminum sea scamp Bench seat brackets and wood and box help

[Jakeman1964]

I Need brackets for bench seats they are 10-1/2 inches long 1-1/2 inches wide to fit wood 5 or 6 holes in them..6 needed

 

[GA_Boater]

You have to make them. We are not a buy, sell or swap site.

 

[Jakeman1964]

You have to make them. We are not a buy, sell or swap site.

Wasn't looking to buy on here...Was looking for info on where to buy them..

 

[Jakeman1964]

You have to make them. We are not a buy, sell or swap site.

Or best way to make them...

 

[JDH-GL]

Is there evidence of there being benches in the boat before? There's a few different style of benches. In any case I think most brackets are riveted into the hull of the boat.

 

[Jakeman1964]

Yes 3 on each side 10-1/2 inches long..Each has 5 or 6 holes filled with epoxy ...Boat is a sea scamp O/B 14ft 1973..
.

 

[JDH-GL]

Maybe try some aluminum angle with a 1.5 to 2 inch leg length and 1/8 inch thickness. Rivet it back in place.