greasemonkeyjmj
Petty Officer 1st Class
- Joined
- Jul 7, 2008
- Messages
- 264
hey folks i have a 1973 evinrude 85 horse that sat for about 2 years i fired it up 2 weeks ago on a muff and it ran good so i took it to water and it had a miss on #2 cylinder i checked plug spark and it looked good, so i thought fuel. i pulled the carb and one of the screws that goes in the front just below and to the right of the throat was almost completely out, so i tightened it up and went ahead and checked inside of carb. it all looked clean, but i went ahead and blew it all out to male sure. i put it back together and it was hitting on all cylinders. i took it back to water and it started missing on a different cylinder, well we messed around with it, and they all started hitting again, but when you first start off it will jump up on plane and wind up good, then it will start surging like it is runnin outta gas, but when you look in carb throats it looks like a full stream of fuel, but we went ahead and changed fuel pump, but it still does it. while running like this you can spray anything combustible into the carbs and it will pick up and go or you can hit the choke button a bit and it will pick up . usually while you are running it at WOT you can hear it trying to hit on all cylinders. this afternoon we pulled the plugs and # 1-3-4 were kinda oily, but #2 was pretty much oil free and kind of a chalky brown shade and texture. we also tried another fuel hose and bubble. any help would be appreciated