jonathanwsmith
Petty Officer 2nd Class
- Joined
- Aug 1, 2010
- Messages
- 102
Hello folks,
I've got a 1975 Cox (Grifton, NC) trailer. It came with a 1976 13' AMF Sunfish.
I need to replace tires and bearings, and there's a Northern Tool 10 miles from me that sells a hub/wheel/tire combo cheaper than new bearings and tires.
My challenge is, I won't know that size to get unless I drive 125 miles round trip to the boat yes. While I'm glad to do that, I wondered if any of you has any rough idea what size hub I need (4", 4 1/2") and what diameter axle I probably have. I'm betting it's a 1" axle and a 4" hub, but I might just but both just to be sure.
Cheers,
Jonathan Smith
Greensboro NC
I've got a 1975 Cox (Grifton, NC) trailer. It came with a 1976 13' AMF Sunfish.
I need to replace tires and bearings, and there's a Northern Tool 10 miles from me that sells a hub/wheel/tire combo cheaper than new bearings and tires.
My challenge is, I won't know that size to get unless I drive 125 miles round trip to the boat yes. While I'm glad to do that, I wondered if any of you has any rough idea what size hub I need (4", 4 1/2") and what diameter axle I probably have. I'm betting it's a 1" axle and a 4" hub, but I might just but both just to be sure.
Cheers,
Jonathan Smith
Greensboro NC