1980 Sea Nymph SS 165 Rebuild

Status
Not open for further replies.
jasoutside

jasoutside

Supreme Mariner
Thread starter
Joined
Dec 20, 2009
Messages
13,269
Re: 1980 Sea Nymph SS 165 Rebuild

No painting today, humidity is just about a million percent right now:(
 
jbcurt00

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,328
Re: 1980 Sea Nymph SS 165 Rebuild

jasoutside said:
It was totally full of pm's from glasser guys trying to figure out how to get into the metal boat club;) I'm just here to help em out:D
Click to expand...

And by help you mean loan 'em a chainsaw or sawzall.......:rolleyes:
 
GA_Boater

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Re: 1980 Sea Nymph SS 165 Rebuild

jasoutside said:
Sorry about that George!

It was totally full of pm's from glasser guys trying to figure out how to get into the metal boat club;) I'm just here to help em out:D
Click to expand...

Well duh. Are they that dense or just high on the glasser solvents? :p
 
Bwana Don

Bwana Don

Lieutenant Commander
Joined
Oct 20, 2009
Messages
1,951
Re: 1980 Sea Nymph SS 165 Rebuild

What no BBQ pics? Can I still get a hamburger with cheddar, two strips of bacon and some slaw on it? Put it on one of them ciabatta buns too, lightly grilled eh?

If your paint scheme looks cool I'm flat out gonna copy it. As far as heat and humidity, it's really bad here today. I spent 5 hours stripping the Scamp. I went through 4 shirts, and a half dozen glasses of iced tea. Hope you had a good Fourth. It's Redneck heaven here in Macomb County nothing but explosions, my ears are still ringing. Still have 10 fingers though. Hope you had a good one.

One day them glassers are gonna come for you buddy. lol

Don
 
64osby

64osby

Admiral
Joined
Jul 28, 2009
Messages
6,826
Re: 1980 Sea Nymph SS 165 Rebuild

jasoutside said:
Hey osby, started playing lumberjack today. 95 degrees and 95% humidity, why not right:rolleyes:
Click to expand...

Your a braver than me.

It was 104 in the afternoon here at the house, really glad my chain saw is needing repairs. I spent most of the day enjoying the A/C. We decided that pizza was a good call as opposed to grilling for dinner and then went to see fireworks.

Tomorrow that Stihl will be here, so no more excuses.

On the windshield, I saw some C/L listing a while back that listed custom made plexi for boats, unknown$$$. http://annarbor.craigslist.org/boa/3088152671.html

Just letting you know in case some mob member doesn't come through for ya.
 
GT1000000

GT1000000

Rear Admiral
Joined
Jul 13, 2011
Messages
4,916
Re: 1980 Sea Nymph SS 165 Rebuild

Congratulations on the arrival of the Family's newest member...
 
jbcurt00

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,328
Re: 1980 Sea Nymph SS 165 Rebuild

Another junior tin-head in the making. Congrats! Hope her mom & she are both doing great & resting comfortably. Congrats again!
 
scoutabout

scoutabout

Lieutenant Commander
Joined
Oct 14, 2006
Messages
1,568
Re: 1980 Sea Nymph SS 165 Rebuild

Congrats on the...er... 'splash" of the new niece! :D

Boy - sure feels weird being all caught up on a jas resto thread! I'm usually scrambling 30 pages and six months behind...

Nice work. Now i can read along with the rest of the class. :)
 
jasoutside

jasoutside

Supreme Mariner
Thread starter
Joined
Dec 20, 2009
Messages
13,269
Re: 1980 Sea Nymph SS 165 Rebuild

Thanks guys, appreciated! Her name is Kate and just as beautiful as can be, I just love her!!!:D


Hey welcome scout! Glad to have ya hanging out!:)

-----------------------------------------------------------


OK, so today the humidity dropped waaaaay down to like 98%:rolleyes: and in between my daddy/uncle/baby/logistics I found a few minutes with some paint.

One more wash down with vinegar and water then on to a light pass of etching primer...
IMAG0090.jpg


I didn't have to use too much as I didn't have very much bare alum there.

Then on to priming. I went with 1:1 primer and acetone....
IMAG0091.jpg


Yah, I know that's not recommended but with this humidity I ran with it.

Here's the gun I'm using...
IMAG0092.jpg


I had to do a bit of fine tuning and overall it worked well.
 
Triton II

Triton II

Commander
Joined
Nov 23, 2004
Messages
2,479
Re: 1980 Sea Nymph SS 165 Rebuild

Cool... another mob member! :D Congratulations.

TII
 
jasoutside

jasoutside

Supreme Mariner
Thread starter
Joined
Dec 20, 2009
Messages
13,269
Re: 1980 Sea Nymph SS 165 Rebuild

SN all primed up...
IMAG0093.jpg


I had just a few runs/drips, nothing too bad. I was reminded of two important things though:

1. Lighting is very important!

2. The difference between too dry, just right and runs/drips is just about a quick second with the gun.

Overall I'm purdy happy with that and she'd ready for the top coat:)
 
Triton II

Triton II

Commander
Joined
Nov 23, 2004
Messages
2,479
Re: 1980 Sea Nymph SS 165 Rebuild

Great job Jas. Now get back to your uncling duties... :D

TII
 
Pmccraney

Pmccraney

Lieutenant Commander
Joined
Jul 26, 2011
Messages
1,734
Re: 1980 Sea Nymph SS 165 Rebuild

Congrats on the niece - love the name (we have one of those in our brood).

The primer looks great. This boat is going to be awesome!
 
jbcurt00

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,328
Re: 1980 Sea Nymph SS 165 Rebuild

Did you get that good of coverage w/ 1 coat of 50/50? Or is it the good original paint giving it such good coverage w/ just 1? Even over the light etching primer....

Looks great anyway you got there...
 
GT1000000

GT1000000

Rear Admiral
Joined
Jul 13, 2011
Messages
4,916
Re: 1980 Sea Nymph SS 165 Rebuild

Now we can call you "optimus-Prime"...:rolleyes:
 
jasoutside

jasoutside

Supreme Mariner
Thread starter
Joined
Dec 20, 2009
Messages
13,269
Re: 1980 Sea Nymph SS 165 Rebuild

Thanks fellas!:)

JB - I just went out to take a closer look at everything. Yup, all good;) Very good coverage. I was even able to get a light sanding in on those few drips I had there. I can't say I made up the 1:1 though. I got that from a fella using Rustoleum for auto painting (I think I have a link somewhere in the Islander thread). I really think I like his recipe. If memory serves me "milk" was the consistency he was after.

I do have the white on hand and should be able to get that on the hull first thing in the a.m. I don't yet have a second color (haven't yet committed:rolleyes:)
 
jbcurt00

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,328
Re: 1980 Sea Nymph SS 165 Rebuild

jasoutside said:
Thanks fellas!:) I really think I like his recipe. If memory serves me "milk" was the consistency he was after.
Click to expand...
Well of course, milk goes great w/ cake, cookies & them brownies you have yet to introduce to the SN

jasoutside said:
I do have the white on hand and should be able to get that on the hull first thing in the a.m. I don't yet have a second color (haven't yet committed:rolleyes:)
Click to expand...
Color all of us here surprised that you have not yet committed to a 2nd color....:eek: White on White is certainly bright & cool on the feet/body parts that come into contact with it.....

That spray coverage is excellent, even from WV:) Nice work w/ the spray gun!
 
dozerII

dozerII

Admiral
Joined
Oct 25, 2009
Messages
6,527
Re: 1980 Sea Nymph SS 165 Rebuild

Holy cow Jason, a guy loses his computer to a storm 10 days ago and comes back to an almost finished boat and your family is bigger. congrats.
Glen
 
Status
Not open for further replies.
Top