1980 suxuki 9.9 propeller

[igotit]

I have a project,1980 suzuki 9.9 with an air cooled briggs powerhead.
My original prop aint gonna last forever.
I been trying google.....nothing found.
No longer available

Original props are labeled j700-j900.
Its a 6 spline design.
Anyone know when to get one?

Thanx.

 

[steelespike]

What size prop is on there now? Usually under the prop nut./What hp is the briggs?
The briggs will limit top speed at 3600 rpm.

 

[igotit]

Prop size is 9 1/4 x8....the splined hub is more important right now,locating a 6 spline seems to be difficult.
Thanx

 

[steelespike]

There is a Prop for a DT25 on Ebay Obviously big, but is 6 spline and 10"pitch so may help the the 3600 briggs rpm produce some speed?

 

[igotit]

Thanx but a 25 prop wont fit,9.9 shaft smaller diameter and shorter shaft.

 

[steelespike]

Won't let me list the site.I did a search for 1980 Suzuki 9.9 prop.
Skipp[ing about 6 eBay listing this next came up.
********** lists a new non thru hub 9.9 prop for $75.

 

[igotit]

Ill check it out and see,thru hub or non thru hub doesnt bother me aslong the spline is right.
Thanx

 

[steelespike]

A thru hub may fit a non thru hub motor but a non thru hub will only work on a non thru hub motor
Unless it has a dual exhaust like some of the Force motors.

 

[igotit]

Im not running my exhaust thru the lower unit,but these old suzuki thru hub props and non thru hub props are completly different designs and will not interchange.