1981 Answer 21' Cuddy Cabin with 1986 150 Evinrude

[Maddoxsdaddy]

Re: 1981 Answer 21' Cuddy Cabin with 1986 150 Evinrude

Hey Matt, be careful! Hopefully, your baby will make it through the season and you'll have some good luck with the fishin'. Make sure you post some "family friendly" pictures of the models too. LOL! If it were me, i would definately look a little deeper into whats causing the soft spots in the floor. If you remember, that's what i had originally and look where if ended up. The worst part for me was getting over the fact it needed to be done. Once you get into it, it ain't that bad. Good Luck with everything.

 

[mattkenton]

Re: 1981 Answer 21' Cuddy Cabin with 1986 150 Evinrude

Hey Matt, be careful! Hopefully, your baby will make it through the season and you'll have some good luck with the fishin'. Make sure you post some "family friendly" pictures of the models too. LOL! If it were me, i would definately look a little deeper into whats causing the soft spots in the floor. If you remember, that's what i had originally and look where if ended up. The worst part for me was getting over the fact it needed to be done. Once you get into it, it ain't that bad. Good Luck with everything.

Thanks. I did a core check on stringers and they are hard. There is no way i could remove the cap from the lower and fix the floors. They are all independantly fiberglassed in. So if one rots, thats it. It does not move on to another section. Pretty cool design. I will post some of the model pics. Forgot about that.