1982 EvinRude 90HP E90MLCNB - Lower unit information needed

[MuskyHunterDave]

Hello. . .

unfortunately The motor ate a cylinder, and I need to sell this lower unit to be able to get a new motor . . . . PLEASE HELP

I was curious if one of you guys could tell me what other years of evininrude or Johnson motors this lower unit will fit.

as I said in the title, it is a 1982 Evinrude 90HP V4 E90MLCNB and the shaft measures 19" from the top of the water pump to the top of the shaft, and 22" from the top of the gear-case to the top of the shaft. I believe this is a long shaft ??? Right ??

20 & 13 splines

Thanks in advance for the help

MuskyHunterDave

"When in Doubt . . . Rip their Lips Out"

 

[tashasdaddy]

Re: 1982 EvinRude 90HP E90MLCNB - Lower unit information needed

probably 78 up but not sure.

 

[MuskyHunterDave]

Re: 1982 EvinRude 90HP E90MLCNB - Lower unit information needed

Thanks for the input, but I need to know for certain.

I am sure someone on here knows for certain, and again guys thanks in advance for the info / advice

 

[MuskyHunterDave]

Re: 1982 EvinRude 90HP E90MLCNB - Lower unit information needed

Hello . . . All

Still looking for the info on this lower unit.

I need to sell it to afford to get a new motor, so I sure hope one of you smart guys that know these thing can enlighten me

Also I was curious what the difference is between a crossflow and a looper motor ??

Thanks again in advance for the help I REALLY APPRECIATE IT !!

 

[lostonbase]

Re: 1982 EvinRude 90HP E90MLCNB - Lower unit information needed

Hi. I have a 90hp Evinrude vintage '86. I purchased the boat w/ the lower unit out. Maybe we could make arranges to make one of us a good motor.

Thanks