1984 Evinrude 15 HP

D

doors67us

Petty Officer 2nd Class
Joined
Aug 2, 2021
Messages
152
Hey guys, I've got a question, my opinion bearing went out of my gear case I removed it by pulling it out, but my question is do I install it through the bottom or do I press it in through the top of the housing down towards them gear case? Is there anything else that I need to know to complete the job
 
S

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,811
Damn...

I want to say SO bad. Bottom, top....press, pulling out, all the way them gearcase, what else to complete the job?

I definitely know the answer 🤩

Sorry
 
R

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,411
The Mexican fellow ----The ----" manual "----- calls for a special tool to drive the bearing in from the top to the correct depth.----Hopefully you measured the position before you pulled it out.
 
T

tphoyt

Lieutenant
Joined
Jun 10, 2010
Messages
1,396
saltchuckmatt said:
Damn...

I want to say SO bad. Bottom, top....press, pulling out, all the way them gearcase, what else to complete the job?

I definitely know the answer 🤩

Sorry
Click to expand...
You ok Matt?
Your coming up with some crazy stuff lately
Best
Tim
 
D

doors67us

Petty Officer 2nd Class
Joined
Aug 2, 2021
Messages
152
racerone said:
The Mexican fellow ----The ----" manual "----- calls for a special tool to drive the bearing in from the top to the correct depth.----Hopefully you measured the position before you pulled it out.
Click to expand...
Haha I like that,no I didn't measure the distance,I drove it in and it seemed to stop ,got hard so I quit
 
R

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,411
Hopefully you drove it it with letters on bearing facing towards the water pump.
 
You must log in or register to reply here.
Top