In the process of putting this one back together. I have the full rebuild kit from WSM. There is no gasket for the exhaust housing adapter (part # 0324059) to outer exhaust housing (part # 0435318). It's a long story as to why this had to come apart. No need to go there. On the BRP parts catalog site there is no listing for a gasket either. https://epc.brp.com/#/Evinrude//Johnson/J90MLCRD_1984/MIDSECTION/J90MLCRD_1984/39468050121/y
There is no water flow between these pieces, it looks like minimal exhaust flow. I either have to make one out of gasket material, (which looks like a pita) or use RTV Black, or maybe Permatex 2 non-hardening or none at all. Did J/E not use one? I don't remember if I cleaned gasket or just crud on these mating surfaces. Help is appreciated. Thanks in advance.
There is no water flow between these pieces, it looks like minimal exhaust flow. I either have to make one out of gasket material, (which looks like a pita) or use RTV Black, or maybe Permatex 2 non-hardening or none at all. Did J/E not use one? I don't remember if I cleaned gasket or just crud on these mating surfaces. Help is appreciated. Thanks in advance.
