1985 85hp o/b spark question

MAXXIE

Chief Petty Officer
Thread starter
Joined
Feb 26, 2009
Messages
556
I'm had an issue on Saturday with the engine. I could only get 35/3600 RPM & 20 MPH (GPS) at WOT. I did notice after it was out of the water that I had for got to open the vent on the fuel tank. I thought that may be the problem. It was not, when I removed the cover I found the top spark plug wire was off, problem fixed, for now. I crimped the boot & it will stay on. The boot is shot & is wrapped with electric tape. I just got this boat/engine & was not aware of this. I thought I could just replace the boot & wire like on a car, but no, it go's into the black box (don't know what it is called), so I'll need to replace that as well. Do I need to replace all three at the same time? Or can I do just the one? Also, what is this part called & how much $$ are they? Can I just pick this item up at the local boat dealer? Thanks, Maxx
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,196
Re: 1985 85hp o/b spark question

Is there enough wire to put on a new end?Way cheaper!!!
You can get the coil at any MERCURY dealer.Gotta have mod# ser#
Sometimes they can be found on E-bay usually cheaper than the dealer.
Some of the guys here have parts.Someone might possibly sell you one.J
 

MAXXIE

Chief Petty Officer
Thread starter
Joined
Feb 26, 2009
Messages
556
Re: 1985 85hp o/b spark question

Thanks, I think there maybe enough to do a new cap. I'll check ebay & the forum as well.
 

moparman

Petty Officer 1st Class
Joined
Oct 14, 2008
Messages
314
Re: 1985 85hp o/b spark question

You can pick up plug wire ends at napa , just recrimp and seal with clear silicon sealant
 
Top