glennj3
Petty Officer 1st Class
- Joined
- Sep 6, 2011
- Messages
- 381
After removing all wires from both batteries & the solenoid & cleaning them all with a wire brush, I have to power to my ignition switch. Both batteries a fully charged & battery selector is good.
Ignition switch fuse is good but there is no power to it. Nothing electrical works including the blower.
I ran a battery cable directly from the positive batter terminal to the red & orange wires on the solenoid. The ignition lights come on & everything works. I turned the key & the engine turned over.
I removed the patch wire because I don’t want to do something dumb & cause other problems.
Any help? Thanks again!
Ignition switch fuse is good but there is no power to it. Nothing electrical works including the blower.
I ran a battery cable directly from the positive batter terminal to the red & orange wires on the solenoid. The ignition lights come on & everything works. I turned the key & the engine turned over.
I removed the patch wire because I don’t want to do something dumb & cause other problems.
Any help? Thanks again!