1986 Force Water Pump

[rudedude]

Can anyone tell me the part number for a water pump kit for a 1986- 125 force?

I looked in iboats but only seen one for a 88-90( i think) 120. Will the 120 kit fit in the 125 ? Just dont want to order the wrong part.

 

[JDP]

Re: 1986 Force Water Pump

Are you looking for a complete kit or just the impeller? Looks like the part number for the kit is FK1069. Just the impeller is 803630T. Crowley has the kit for 79.90 and impeller for 17

 

[rudedude]

Re: 1986 Force Water Pump

Impellar or the kit. Does the crowley kit include the water pump houseing?

All I need is the impeller but if I drop the LU I might as well change it all .

 

[rudedude]

Re: 1986 Force Water Pump

Well I found the correct water pump. This motor was taken to a shop and had a water pump check and were told to replace the whole shooting match, from impeller to houseing if there was any pitting or scoreing evedent.

Was charge for a replacement of = houseing ,impeller , key, bolts,lock washers, plate, and gaskets. I pulled the LU this morning and found out they didnt do anything but the impeller. I did get a new,and I mean brand new cotter pin for the shift rod connection .

This shop was recomended and you can bet there going to get a good look at this houseing. It was so pitted that they might as well put the old impeller back on.

From now on I will do the work even if that means the boat is down for the season.

Check out your boat shops. If you see a very young guy in there with a wrench in his hand ,get WOT out of there.

Thanks for the info in here.