Hello thank you for taking time to read and assist in way possible. I’ve got a 1988 Johnson gt 150 I wanted to install a water pressure gauge accidentally broke the plastic elbow so I removed the exhaust housing just the very first outer metal plate bought a new gasket taped the hole to 1/8 and put a T fitting on it for the pee hole and water pressure gauge. I have no water pressure at all period no pee hole nothing. I took off the outer plate and just cranked the motor and had water coming out of the hole where the plate sits and water coming from the 2 holes on the back end as well. Reinstall and torqued to 5.75 ft lbs same thing no water. Took off the pee hole hose to see if it was weak still nothing. What could be going on? I know I put the gasket on the correct way as well.
