1988 mercury control

[striperguy]

I have a 1988 mercury black that i installed today. needing to know where the wires go coming from the front of the control box. i think they go to my gauges just not sure which wire goes where, i put it on a 1991 stratos so do match the colors or what. hope someone can help, thanks

 

[j_martin]

Re: 1988 mercury control

Colors should match if your boat was wired to BIA code.

Get a maintainance manual. It has all the diagrams in it.

hope it helps
John

 

[Chris1956]

Re: 1988 mercury control

Striperguy, If the plug is the three connector type, it will normally be Ign accessory (+12VDC), ground and tach signal.

 

[striperguy]

Re: 1988 mercury control

i wired it color to color and know the only way it will start is if i hold the trailor button in at the same time i start the engine, and the same thing for the trim is this right, not familiar with these controls. thanks for the input.

 

[Chris1956]

Re: 1988 mercury control

Clearly your wiring is incorrect. Ign switch and trim switch get unswitched +12V (red). Sounds like you need a wiring diaghram.

 

[striperguy]

Re: 1988 mercury control

figured out the wireing know i have another issue. i bought a new throttle cable and it will not go into gear, is the cable to long?