1989 sea ray 200 with mercruiser 3.0, water in bilge

[natsgrampy]

I noticed I am getting some water in the bilge while I am out on the water. I checked both bellows and both are on tight. The bellows was put on last summer and the shift bellows the season before. Can't tell where it is coming in so I was wondering, where should I start? Yesterday I put the plug in and put some water in the bilge to see if that leaked, it didn't, that I could see.

Looking for the best avenue to find where the water is getting in. It isn't a ton of water, it is not enough to make the pump turn on. Yet still it is concerning.

Thanks for any help!

 

[R055]

Run your motor on muffs and make sure it's not leaking from the motor. Check the water drain plugs and the tubes connected to the water circulation pump.