chriscamp612
Recruit
- Joined
- Mar 28, 2009
- Messages
- 3
I have a 1990 20hp johnson, this year I put in a new water pump kit, prop, Spark plugs and wires. New fuel tank and lines with new pump bulb and a in line fuel filter and was confident my boat was ready to go. The motor Idled rough and ran sluggish. Then I took off the carb and had a Johnson tech rebuild it with no change, a rough idle a sneeze and it dies. I took the boat to the same Johnson boat place and they changed the ignition module, fuel pump, rebuilt primer pump, changed the head gasket, intake gasket and the left side exhaust and water gaskets and still no change. Thay adjusted the timing and carb sync and had other techs go through the carb 3 more times incase he missed anything, still no change it runs the same. I got the boat back home and I was messing with it and a car tech heard it spitting and sputtering, he walked over and blocked most of the incomming air flow to the carb and it purred like it was brand new, took his hand off to allow full air flow to the carb and it choked and died. Does the carb just need to be replaced or did I just take it to the wrong place?