1990 force 125 shift bellow

[borutskis]

Confirmed leak at the shift bellow. I'm assuming from looking at the part diagram that the bellow is also the oil seal for the shift shaft. Can't source the part oem or aftermarket. Any one try and use rtv on this bellow? I know it's not a great fix but if I can't find this bellow I'm resorting to a repair

 

[tg3690]

https://forums.iboats.com/threads/force-125-1986-hole-in-front-of-lower-unit-weeping-oil.750996/ You could take a look at this thread, is about the same problem you are having with the bellows......post#34 talks about a solution by Franz Marine that fixes the problem....assuming he still does this. It aint cheap but is near impossible to find a new bellows anywhere. And yes, the bellows is the seal (according to Nordin in that thread) FYI