1990 v-200 Stator Test, are #'s to low? (5454A34)

[danamul1977]

I've been having problems bogging down at 2500-3000 rpms under load so I wanted to test the stator. Wondering if these #'s are to low and would cause the problem. Book says (between blue and red wires, 4450-4600ohms) mine is 4130. Between blue/white, red/white 4450-4600ohms, Mine is 4170. Everything else tested ok, (triger was ok). Would this cause a high speed problems under load.

Also wondering if it matters what yellow stator wire goes where on the rectifier. Is their a high speed wire and low speed? I need to know how to reconnect it, they seem to be the same. TY