1993 OMC 5.0 L Wiring

mereljz71

Recruit
Joined
Jun 3, 2011
Messages
4
First ever post...I recently purchased a 1993 Four Winns Horizon 190 with a OMC 5.0L motor. Did some work to the water pump and removed some wiring to make things easier. (I did say Easier) . The large round plug that connects the instrument panel has a small rubber 3 wire connector coming out of it and I can not see where to plug it back in. There is a Green/white, blue/white and red/purple wire going to this rubber connector. Hope that helps.... I can post pictures if it helps...
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: 1993 OMC 5.0 L Wiring

That 3 wire hookup is for your trim and tilt. Look for a similar plug coming from the throttle/shifter control.
 

mcleaves

Chief Petty Officer
Joined
Sep 15, 2003
Messages
521
Re: 1993 OMC 5.0 L Wiring

It should be on the starboard side of the engine at the back of the exhaust manifold. The pigtail off the harness isn't too long, so the piece to connect it to should be fairly long (18" or so)
 

mereljz71

Recruit
Joined
Jun 3, 2011
Messages
4
Re: 1993 OMC 5.0 L Wiring

Guys thanks for the replys, that worked and we spent the weekend on the lake. Thanks again.....
 
Top