1995 maxum canvas rigging

[Jimmymac233]

Help!! I have a 95 Maxum 2000SC w/factory canvas. I can't locate the "main Bow". Maxum is no help. I have a part number 51190-A (US Marine 1995). Does anyone know who sells this piece of aluminum tubing bent to factory specs? Help! I want to restore my boat the right way. Jimmy

 

[sdunt]

Re: 1995 maxum canvas rigging

Do you have any kind of pattern you could use to make your own? If you can't find materials locally, you might try onlinemetals.com. I have ordered several different sizes of pipe from there for projects. They have a search where you can put in the necessary outside dimension, OD and it will diplay all pipe that meet that measurement.

 

[sandwichestime]

Re: 1995 maxum canvas rigging

do you have the other bows? it should be stackable, and most likely about 2" longer than the front bow on each side.

 

[Jimmymac233]

Re: 1995 maxum canvas rigging

do you have the other bows? it should be stackable, and most likely about 2" longer than the front bow on each side.

 

[tommays]

Re: 1995 maxum canvas rigging

http://www.maxumboatparts.com/

I have a 1995 2000Sc also

Its kind of hit and miss mostly MISS

Islander boat center has a good parts place down at bergin point and if you call with the HIN they will tell you

But at 11 years old i have been on my own there are a LOT of canvas shops in are area that should be able to bend you a new one very easy

Tommays