1997 Mirrocraft 18' aluminum fish n ski

BWR1953

Admiral
Thread starter
Joined
Jan 23, 2009
Messages
6,641
My USAF buddy from PA was in Orlando visiting his kids/grandkids/great grandkids earlier this week. He drove all the way over here (100 miles) to visit me for 7 hours. Haven't seen him since 2017. Known him 46 years. We had a great time getting caught up. His health, my health, life, the universe and everything! 😁

So I put him to work on the XR6! :LOL:
The man's happiest with a wrench in his hand. 🤪
1.jpg
 

BWR1953

Admiral
Thread starter
Joined
Jan 23, 2009
Messages
6,641
18 months since it's been on the water. A little Seafoam and fresh gas and it fired right up. And I felt better this morning than I have for weeks, so I got out there and got work done while I could!
 

BWR1953

Admiral
Thread starter
Joined
Jan 23, 2009
Messages
6,641
Did I ever mention that I hate working on boats? I really do. Especially old boats. They're not a "tinkerer" hobby for me. The boat is a means to get me out on the water to go fishing.

And this morning is yet another example of why I dislike working on them.

When the boy removed the airbox for me several weeks back, he "misplaced" 5 washers used to hold the airbox to the carbs. When I asked where they might be, he replied "I dunno." Fine. I ordered replacement washers at $17 for 5 with shipping. Got those a couple days ago, so this morning I went out to the garage to put it all back together. Started cleaning the airbox and discovered 4 washers "glued" to the airbox under a thick layer of multi-year 2-stroke goodness. Fine.

Kept cleaning and discovered that the plastic compression posts inside the airbox are crushed and/or deformed. Some previous owner(s) had apparently applied the "tighten it until it's crushed" method. And no gaskets or signs of gaskets anywhere. I gave up. Abandoned ship and am back in the house until the boy gets here in a few hours.

1.jpg


2.jpg

3.jpg
 

BWR1953

Admiral
Thread starter
Joined
Jan 23, 2009
Messages
6,641
Yesterday I picked up a used cover for the MC. Not bad shape, very close in size. This morning I stretched it out upside down on the driveway for a look. Seems like a couple of the reinforcement pads did their job.

I'm satisfied so far. Will know more once the boy gets here and we can fit it over the boat for a better look.

5.jpg

4.jpg
 

Attachments

  • 1794763861211.jpeg
    1794763861211.jpeg
    205.9 KB · Views: 0

SHSU

Lieutenant Junior+Starmada Splash Of The Year 2019
Joined
Mar 8, 2017
Messages
1,782
Did I ever mention that I hate working on boats? I really do. Especially old boats. They're not a "tinkerer" hobby for me. The boat is a means to get me out on the water to go fishing.

And this morning is yet another example of why I dislike working on them.

When the boy removed the airbox for me several weeks back, he "misplaced" 5 washers used to hold the airbox to the carbs. When I asked where they might be, he replied "I dunno." Fine. I ordered replacement washers at $17 for 5 with shipping. Got those a couple days ago, so this morning I went out to the garage to put it all back together. Started cleaning the airbox and discovered 4 washers "glued" to the airbox under a thick layer of multi-year 2-stroke goodness. Fine.

Kept cleaning and discovered that the plastic compression posts inside the airbox are crushed and/or deformed. Some previous owner(s) had apparently applied the "tighten it until it's crushed" method. And no gaskets or signs of gaskets anywhere. I gave up. Abandoned ship and am back in the house until the boy gets here in a few hours.

View attachment 421154


View attachment 421155

View attachment 421156

Just means when its all repaired you know it was done right.

SHSU
 

BWR1953

Admiral
Thread starter
Joined
Jan 23, 2009
Messages
6,641
I got the sound attenuator and cowling installed this evening with the help of the boy. New (old) cover laid on the boat. We'll get it installed correctly tomorrow morning and then get the boat out of the garage. All done!
 
Top