Robert Baker
Cadet
- Joined
- Sep 14, 2014
- Messages
- 12
1999 90hp won’t run unless I keep the key turned manualy
Installed a new key switch same thing won’t run when Iet go of the keywon'T run in KEY on position ? did you check the key ?
time to take out the VOM and check things out... when did this start happening ?? recently or is this a new to you engine ???Installed a new key switch same thing won’t run when Iet go of the key
Last trip out put gas and oil in there tanks and went to lake with grandkids board started and ran for about 10 minutes died and no restart unless I hold the key in crank positiontime to take out the VOM and check things out... when did this start happening ?? recently or is this a new to you engine ???
normally the switch A post has B+ at key on position
All post seem to have the correct continuity when testedtime to take out the VOM and check things out... when did this start happening ?? recently or is this a new to you engine ???
normally the switch A post has B+ at key on position
Amazon ?Part # of the switch?----Where did the switch come from ?
Have owned this motor for three years with no problemsAll post seem to have the correct continuity when tested