#2 cylinder not firing

[topdogeye]

Whent out yesterday eavening motor sounded funny well all I got out of it was 2800 rpm did some sniffing around and the #2 cylinder was not firing. Today I threw a back up coil on and the problem was still there no spark? 89' 60 hrs evinrude motor always ran fine up until this point. I did notice that the wires to the coil were hanging outward and I may have pulled on them when installing the motor cover?

 

[CATransplant]

Re: #2 cylinder not firing

Model number? The more information you provide, the sooner you get an answer that makes sense.

 

[topdogeye]

Re: #2 cylinder not firing

where is the model number located?

 

[Benny1963]

Re: #2 cylinder not firing

may be powerpack prob,get with me tommorrow pm me i will give ya my phone number were do you live in br . leets get in touch on phone well meat
and i will come to ya house with comp gauge spark tester and meter
well see if we can get ya goin i will prob be on water next weekend testing my 175 i put in at bayside like your going to port vincent down hwy 16
its close puts ya right by freds on denham side if not you can put in at big johns across the river in br and i will meet ya .lets talk its hard for me to type
talk to ya tommorrow leave me your number and a good time to call ya .
later

 

[topdogeye]

Re: #2 cylinder not firing

model # is E60TLCEA

 

[5150abf]

Re: #2 cylinder not firing

Just for grins squirt some gas into the dead cylinder, maybe the carb picked up some crap, may not be spark.

 

[tashasdaddy]

Re: #2 cylinder not firing

completely swap with a known working coil. spare could be bad.

 

[topdogeye]

Re: #2 cylinder not firing

when I discovered the issue I pulled #1 wire engine killed when put back cranked up when I pulled # 2 stayed running put back when I pulled # 3 engine killed. I'll try the gas trick and get back to yall.

 

[topdogeye]

Re: #2 cylinder not firing

yall don't think that wire getting tugged on would mess up in the power pack. The orange and purple wire to be exact.