Basstactics
Cadet
- Joined
- Jan 28, 2004
- Messages
- 11
Recently I have noticed that my power trim will not trim as high as it used to under full throttle. When trimming up at wot it will trim to approx 1/4 gauge and stay there. once I back off the throttle it will raise the motor. The sweet spot on my set up is about 1/4 the distance between 1/4 and 1/2 on the gauge and now I can't get there. I have checked the fluid level and it is full. Anything else I should check before taking the pump motor off?