FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Hi there, Typically you should be able to find them on the sides of the thermostat housing. Now on some of the early models, you may find the sender close to the thermostat housing but mounted on the "intake manifold". You may have to remove a hose to gain easier access to them. The sensor should have a yellow and black wire going into it and you just unplug it while the other sender will have a tan wire going to it. See and click on item part numbers 8 & 16 for photos. Hope this helps, good luck.
Nope,.... Just the key "On",.... With the key "On', the gauge should peg to Hot when groundin' the sender, 'n the alarm should ring when groundin' the switch,...