cstrikevirus
Recruit
- Joined
- May 12, 2009
- Messages
- 3
Hey guys,
here's the story we are not able to start the engine it does crank but no start, it's got no spark in any cylinder and no impulse to injectors i checked everything that is possible and still no luck
i checked circuit breaker , neutral safety switch , all fuses , also that gray wire that goes to almost all sensors which is 5v + is good , and black/pnk which is 5v - is also good too
and i know that ecm is good so what you guys think could be wrong?
and what makes ecm to give signal to white/green wire to ignition coil??
thanks in advance.
here's the story we are not able to start the engine it does crank but no start, it's got no spark in any cylinder and no impulse to injectors i checked everything that is possible and still no luck
i checked circuit breaker , neutral safety switch , all fuses , also that gray wire that goes to almost all sensors which is 5v + is good , and black/pnk which is 5v - is also good too
and i know that ecm is good so what you guys think could be wrong?
and what makes ecm to give signal to white/green wire to ignition coil??
thanks in advance.