2005 Johnson J90GLSOB 90hp two stroke - question on dropping the lower unit

[SweetD]

Quick question, when disconnecting the shift shaft on this motor, do I leave the gear in neutral, or should I be in forward/reverse for this procedure? Manual does not specify, just says to remove the shift rod link pin and push the shift rod link towards the power head.

Thanks!

 

[racerone]

The actual shift position does not matter for the lower unit itself.------But you may have to use forward for room to push the lever over to the port side.---Do not turn the shift rod in the lower unit.-----Check shift rod height before installing.

 

[SweetD]

Roger that, I understand what you're saying, using forward gear can provide clearance. I will check shift rod height, hopefully won't have to move it at all. Thanks!

 

[SweetD]

Ok I was able to remove the lower unit without issue today. Now going to perform a cooling system flush with marine descaling product and submersible pump setup, and also service water pump/impeller while it's apart. Hopefully it goes back together as easily as it came apart (famous last words) - thanks!