111torrance111
Petty Officer 1st Class
- Joined
- Jan 8, 2006
- Messages
- 275
I have a 25 HP Tiller motor that stop running, did all the basic trouble shooting and it comes down to the Fuel Separator System.
Serial # OR391407 (4 Stroke)
If I squirt fule in the cylinders it fires right up, I trace the fuel to see where i'm losing it. It goes into the Fuel Separator (VSA) but doesn't come out. I removed the VSA and installed a new pump, reassembled and still no fuel coming out. I checked the voltage going the the VSA with the switch in the RUN position and had zero voltage, but with the starter engaged on have 13.5 volts.
Short of replacing the VSA is there any other test I can do or something else I should check?
Jerry
Serial # OR391407 (4 Stroke)
If I squirt fule in the cylinders it fires right up, I trace the fuel to see where i'm losing it. It goes into the Fuel Separator (VSA) but doesn't come out. I removed the VSA and installed a new pump, reassembled and still no fuel coming out. I checked the voltage going the the VSA with the switch in the RUN position and had zero voltage, but with the starter engaged on have 13.5 volts.
Short of replacing the VSA is there any other test I can do or something else I should check?
Jerry