Big Wave Dave
Recruit
- Joined
- Dec 13, 2007
- Messages
- 1
I bought a used SX210, took out and here's the issues.
1) Port Tach out, pulled out of connector and reinserted. Sill out. Need need tach?
2) Starboard engine started rough and smoothed out. Ran it up to 8K RPM and 45 MPH. Operated nioce for 15 minutes. Now won't go over 7K RPM, will surge to 8K for a few seconds and comes back down. Fuel pump filter?
3) Right rear axle hub very hot. Bearings?
Thanks for the advice.
Dave
1) Port Tach out, pulled out of connector and reinserted. Sill out. Need need tach?
2) Starboard engine started rough and smoothed out. Ran it up to 8K RPM and 45 MPH. Operated nioce for 15 minutes. Now won't go over 7K RPM, will surge to 8K for a few seconds and comes back down. Fuel pump filter?
3) Right rear axle hub very hot. Bearings?
Thanks for the advice.
Dave