saaabe
Seaman
- Joined
- Jun 19, 2010
- Messages
- 54
hello, this is the first time I"m in this forum. I need help with a 2007 3.0L 4 cylinder Mercuries engine. I was on the water running about 5100 rpm and the engine die the drive belt broke and the engine overheated but it did not run much time like this only a minute o so, the problem is I replace the drive belt and now the engine does not start also no compression in the pistons already check timing gears OK when they meet at mark piston #1 is all the way to the top so the gears are on time. the engine turn faster than normally I check gas is OK check spark OK too at this point am stuck is not the crankshaft because pistons move but have not check yet the camshaft may this be the problem can any body have a subjection I don't want to keep taking the engine apart if I don't have to thank you....

