225 Johnson water leak question

Striper Blues

Petty Officer 2nd Class
Joined
Jul 30, 2003
Messages
135
Greetings all,

I have a set of 2005 225hp four stroke Johnsons (made by suzuki) on my boat and the port engine started leaking water from a small hole in the engine mount cover. This is Johnson pn 5035134. At first I though a plug fell out but the other engine has the same hole with no water coming out. The port side leaks water but its not under any pressure just kind of dribbles out.

Is anyone familiar with this ? I cant tell from the part catalog if its only separated from a water cavity by the mounting gasket or if the cover is no good. I didn't want to pull it off until I asked for input.

Thanks in advance.
Striper Blues
 

Striper Blues

Petty Officer 2nd Class
Joined
Jul 30, 2003
Messages
135
Re: 225 Johnson water leak question

Thought I'd bump this. Hasn't anyone seen a water leak from the back eng mount cover?

Its at the back of the motor where the engine joins engine mount.

I added this picture.

thanks again folks.
 

Attachments

  • 225 Leak.jpg
    225 Leak.jpg
    37.5 KB · Views: 0

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: 225 Johnson water leak question

run the motor with the cover off, see if you can tell where it is coming from. possible leak in tale tell hose?
 
Top