3-wire trim limit switch - where to get?

[45Auto]

Hello,

My trim limit switch on my 2003 Bravo 3x is crapped out. It worked fine before I replaced the gimbal ring but doesn't work at all now (probably because I crushed it and cracked it when I replaced the gimbal ring....).

The drive is on a 2003 Crownline. Drive serial number is 0M164955. My trim limit switch has 3 black wires coming out of it, but the only replacements I can seem to find only have 2 wires coming out of the limit switch. No numbers or words on any side of the limit switch, just a black puck with 3 black wires coming out.

My throttle assembly doesn't have a separate trailer switch, but it won't let you raise the drive above the 21 3/4 ram extension with the motor running. Some computer wizardry I assume. With the motor off the drive comes all the way up.

Anybody familiar with this? A part number for the 3-wire limit switch would be nice!

Thanks,

Keith

 

[Barnacle_Bill]

Re: 3-wire trim limit switch - where to get?

Go up to the top left of the page and click on Marine Store, then search for switch. They have lots of them.

 

[Don S]

Re: 3-wire trim limit switch - where to get?

Do you have Smartcraft gauges? If so, that is what uses the 3 wire switch. It's PN is 863187A1

On your trim switch, when the drive is up to full trim, push the trim button a little harder, it has a second indent.

 

[45Auto]

Re: 3-wire trim limit switch - where to get?

Thanks Don,

That's exactly what I needed. My boat doesn't have Smartcraft guages, but the engine does have the Smartcraft capability. Apparently the outdrive uses the Smartcraft limit switch, so I guess the throttle assembly with the trim switch is set up for it.

Thanks again Don!