351 changes 1973 to present - motor mounts/manifolds?

erikgreen

Captain
Joined
Jan 8, 2007
Messages
3,105
Re: 351 changes 1973 to present - motor mounts/manifolds?

Ah, yes... the engine is wider. Thanks, I'll plan on the vertical risers.

Erik
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,090
Re: 351 changes 1973 to present - motor mounts/manifolds?

Ayuh,...........

I tend to Agree with your conclusions,.....
But,......
A few weeks ago, Don pointed out that there are Some of the old Mod.1s that are Narrower, at the junction of the Bellhousing,+ the Top of the Drive,.....
The 6 Big Studs are Closer together on these, than the Alphas........
And,......
I Think we were talking about the Ford versions in That thread.........

I've never personally run into this before,...... But Don showed the Studs being, I Think, 1/8" Closer........

Hopefully,...... Don will stop by,+ either confirm this, or tell me I'm Nuts again............ d:)
 
Top