5.0L GM timing question

Searay23

Cadet
Thread starter
Joined
Jul 26, 2009
Messages
10
Newbie here to the forum.. Question: How do you tell what kind of ignition you have.. I have '93 Searay, 5.0LX GM, 4 barrel, mercruiser. I want to check my 8* timing and been reading here about jumper wires, etc.. Also, on the notched timing tab, is each of the notches 4*? Need a procedure to follow.. thanks.. Clint
PS: Eng S/N: OF013756
 

rs2k

Chief Petty Officer
Joined
Aug 2, 2008
Messages
486
Re: 5.0L GM timing question

Does it have points ignition or electronic ignition?

I recommend a timing light with an dial. Then you can set the dial to 8? and just line up the TDC mark.
 

Searay23

Cadet
Thread starter
Joined
Jul 26, 2009
Messages
10
Re: 5.0L GM timing question

Does it have points ignition or electronic ignition?

I recommend a timing light with an dial. Then you can set the dial to 8? and just line up the TDC mark.

It has electronic.. I have a Craftsman timing light and it is not adjustable..
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: 5.0L GM timing question

You have a Thunderbolt IV ignition. No wires to jumper or anything. Just aim your timing light and turn the distributor.

Look what I found in the OEM service manual.

attachment.php
 

Attachments

  • TB4.JPG
    TB4.JPG
    69.4 KB · Views: 0

Searay23

Cadet
Thread starter
Joined
Jul 26, 2009
Messages
10
Re: 5.0L GM timing question

Don... That's what i was looking for... "you the man"..!! Thanks
 
Top