50 hp evinrude 2-stroke prop question

[jerkoz]

have a 50 evinrude on a 16 ft. alum. starcraft s.s. how can i tell what the prop pitch is? is it marked on the inside? i just use the boat for fishing and pleasure. no skiing or tubing.

 

[sutor623]

Re: 50 hp evinrude 2-stroke prop question

What year is the motor?

 

[jerkoz]

Re: 50 hp evinrude 2-stroke prop question

no exactly sure of the year. will check the numbers and get to you.

 

[Bifflefan]

Re: 50 hp evinrude 2-stroke prop question

The pitch and diameter should be stamped on the barrel of the hub. If not you can measure the diameter with a tape from the center to the end of one of the blades and then double it. As for the pitch, a prop shop will have to measure that for you. There are ways you can do it, but they are very involved and are usually not right anyway.

 

[steelespike]

Re: 50 hp evinrude 2-stroke prop question

If through hub exhaust the numbers may appear near the base of the blades or under the prop nut.

 

[jerkoz]

Re: 50 hp evinrude 2-stroke prop question

The motor is a 1986 50 h.p. Vro model #e50belcde

 

[steelespike]

Re: 50 hp evinrude 2-stroke prop question

Prop numbers should appear near the base of the blades or under ther prop nut.
If your thinking replacement it should be based on your present performance and prop size.
Read "read thes first" at the top of the page and get us as much info as possible.

 

[Silvertip]

Re: 50 hp evinrude 2-stroke prop question

12-1/4 x 15P is a very typical prop for that size boat and that motor. 11-3/4 x 17 is another possibility but those two are the most common.

 

[Congreve502]

Re: 50 hp evinrude 2-stroke prop question

Thank you

 

[sutor623]

Re: 50 hp evinrude 2-stroke prop question

Hows she running with that 50hp? I have a 16' Starcraft Fishmaster (Aluminum) with a 65hp Merc and she flies! Oh and by the way I am running a 16p prop, just FYI.