6.5 hp evinrude start but won’t run

Tiki91

Cadet
Joined
Oct 11, 2015
Messages
20
Have 6.5 evinrude that barely starts but won’t stay running has spark and 80 psi compression on both cylinders.just a ligh purr for a few second and that’s it.putting fuel directly into spark plug holes.banging my head against the wall on this one.
 

Attachments

  • IMG_1223.MOV
    2.2 MB · Views: 2

saltchuckmatt

Commander
Joined
Jul 19, 2019
Messages
2,811
Have 6.5 evinrude that barely starts but won’t stay running has spark and 80 psi compression on both cylinders.just a ligh purr for a few second and that’s it.putting fuel directly into spark plug holes.banging my head against the wall on this one.
Try pumping the primer ball when it first starts up.....if that doesn't do it then you will probably need to go through the carbs.
 

Tiki91

Cadet
Joined
Oct 11, 2015
Messages
20
Try pumping the primer ball when it first starts up.....if that doesn't do it then you will probably need to go through the carbs.
Done all that .did you see the video?should run longer and faster with the fuel injected directoy into th cylinders
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,471
Does spark jump a gap of 3/8" or more on both leads , yes or no ?----Checked the flywheel key.-----Water in fuel.-----Have you cleaned the carburetor ?----Orange / blue stripe on the top coil ?
 
Top