Re: 71 johnson 9.5 high speed adjustment
No, there isn't. The mixture is controlled by an oriface located directly behind the obvious looking gasketed screw in the protrusion from the bottom of the carburetor's bowl. The only way to adjust the mixture is by changing the oriface, as long as the float height is set correctly. The float must be adjusted to be parallel with the body of the carb, when it is turned upside-down.<br />If you suspect you're running rich or lean, try reading the spark plugs. Run at WOT for a few minutes with new plugs installed on the water, and kill the engine suddenly. Then remove the spark plugs and examine the insulators.