75 merc 650, 3cyc. engine., I have two gas tanks (22L) each.
I ran out of gas on one of the tanks as I was going full speed, engine stopped.. I plugged in the fuel hose on the other gas tank, primed it, tried starting it, it was hard to start, placed the smaller lever on the throttle box up a bit, it started.. I placed it in forward gear, and give it gas..it would has half the power.. its like one of the cylinders not working, or not getting spark!? etc.. didnt know what the problem was while I was on the water. Anyway I was able to make it to the boat launch and take my boat out of the water.
Came home and first checked spark plugs, found out that on 2nd cylinder (middle), the plug was covered with !? melted metal or piston ring !? someting.. like someone soldered solder onto it.. thin layer of it.
While this happened!??
I checked compression, its 140, 120, 140 ..
opened up the side intake cover, checked 2nd cylinder, top pistion ring was like not playing when pushed in with a screw driver, but other two rings on the cylinder was playing normally.
What could have caused this, ?? why on only 2nd cylinder?! suggestions what to do please...
I ran out of gas on one of the tanks as I was going full speed, engine stopped.. I plugged in the fuel hose on the other gas tank, primed it, tried starting it, it was hard to start, placed the smaller lever on the throttle box up a bit, it started.. I placed it in forward gear, and give it gas..it would has half the power.. its like one of the cylinders not working, or not getting spark!? etc.. didnt know what the problem was while I was on the water. Anyway I was able to make it to the boat launch and take my boat out of the water.
Came home and first checked spark plugs, found out that on 2nd cylinder (middle), the plug was covered with !? melted metal or piston ring !? someting.. like someone soldered solder onto it.. thin layer of it.
While this happened!??
I checked compression, its 140, 120, 140 ..
opened up the side intake cover, checked 2nd cylinder, top pistion ring was like not playing when pushed in with a screw driver, but other two rings on the cylinder was playing normally.
What could have caused this, ?? why on only 2nd cylinder?! suggestions what to do please...