76 Evinrude carb low speed needle

[ousooners1baby]

OK, I have the carb rebuilt ,now I am waiting on my new low speed needle. Since I have never seen one properly installed. How do the washers or whatever goes on the needle install in the carb? In what order? Does anyone have a jpeg with the proper alignment of a needle valve. Not the exploded view please.

I appreciate you guys. I have learned a lot just from reading these forums daily.

 

[Daviet]

Re: 76 Evinrude carb low speed needle

If you would post your model number someone might be able to help you.
Are you working on a 76 or 67 model year?

 

[ousooners1baby]

Re: 76 Evinrude carb low speed needle

Sorry!

6 HP

19and76

model 66044

 

[Vic.S]

Re: 76 Evinrude carb low speed needle

Two packing rings in first followed by the washer

Don't know what you are expecting in the way of a diagram but the exploded view in the parts catalog shows it clearly enough.
http://shop2.evinrude.com/Index.aspx?s1=60bf40d93129036e5ff69982a4e61008&catalog_id=0&siteid=1

not good enough then try the workshop manual from Ken Cook


For details for adjusting follow the link to Joe's instructions on the engine FAQs board from Tashasdaddy's "Top Secret File"

 

[Daviet]

Re: 76 Evinrude carb low speed needle

...

 

[ousooners1baby]

Re: 76 Evinrude carb low speed needle

Yeah, that looks like 3 of the same things to me. Remember I have nothing to look at on previous needle to go by. Is it round washers? Does it matter?

 

[bktheking]

Re: 76 Evinrude carb low speed needle

Round washers, they sorta look like cork in nature, at least in the OMC kits.

 

[FJ_Russo]

Re: 76 Evinrude carb low speed needle

I believe this is going to be an exploded view of your Carb.

http://www.boats.net/parts/search/BRP/EVINRUDE/1976/6604A%201976/CARBURETOR/parts.html