Re: 84' 5.0 starting problems
Well,..... The Igntion draws it's power from 1 of the smaller wires on the Starter I believe,.....<br />And You Just Changed That,.......<br /><br />The Power Trim draws it's power from a Seperate Set of Wires,... Usually in a companion mounting with the Big Starter Wires,.. Directly to the Battery............<br />And You Just Changed That,.......<br /><br />I Guess I'd say you might want to Start with those 2 Points.........
<br /><br />While you're there,..... Polish
Each,+ Every wiring connector, Shiny Copper Clean, with a piece of emerycloth or sandpaper.......And Don't Forget the Grounds,... Both Ends......<br />Then reassemble them, tighten them Good,+ Snug,...<br />When you're Happy,+ Everything Tests out,+ is Working,.........<br />Slather a Big Finger Full of Grease,... Any Grease,... All over the Wiring Ends, at their junctions........The Battery Terminals Too.....<br />I Promise you,... You Won't have Any Corrision Issues for a Long Time,.. Even in Salt........<br /><br />You'll Also want to be Doing the usual Shake, Wiggle, Pull Tests,.....While you're Cleaning,......<br /><br />I Think you'll Find your Gremlin............
