First time at this forum - appreciate any help <br />I have a 1980 85hp evinrude - was running great just a few weeks ago. Now, it starts fine when I use the idle lever, will rev up to 4500rpm, but dies when I bring the idle lever down to normal "run" position. I tried pushing the idle lever down quickly and putting it into gear before it died and it stayed running, but won't get any power - stays below 2000rpm at full throttle. It seems like it starving for gas or "sucking air". I changed gas, gas lines, fuel filter screens, etc. No Luck. This motor runs too strong to be put out of commission because of a bad idle problem. Any Help?